Laminated fir wood
Three seals (two thermal, one acoustic )
Closing hardware at several points
Compartment glass room from 30 to 50mm
Tilt and turn support hinge 150-180 Kg capacity
Paint matt verde ral 6000 ( see finishes and stain colours file )
Water-based outdoor finish
Complete cycle of water paint for outdoor

Additional Accessories

The wood used for the coating are laminated fir and pine

Optional

- Telescopic rod lock with internal-external key for knob
- Door bolt for shutters
- Fittings for folding two / three / four doors (with or without snap clasp)
- Tit for folding shutters
- Black steel safe kit (patented)
- Wall hinge with chemical anchors
- Sub-frames from galvanized iron hinges and 25x25 mm with long shanks for outer coat
- "Shutter-locker" with pressure cap and rear stop
- "Shutter-locker" with a long neck screw cap pressure and still post
- Snap-to-ceiling windows
- Magnetic shutters
- Magnetic shutters for outer coat

Shutters with rubber corner stoppers: it blocks the shutter without having to pierce the wall outside. Very useful in the presence of outer coats polystyrene or mortar of old buildings. It is installed on the inside of the door

   

Magnetic Contact

Magnetic contacts for alarm.

Ecology pullout sliding

Ecology pullout sliding.

Eternity aluminium wood

Eternity 90 aluminium wood.

Fir

Conifer found in central and northern Europe. It has an excellent workability and stability; it is suitable for both internal and external carpentry products. Pine wood has a light-pale yellow colour and like many conifer woods it has darker nodes commonly called knots. Use: interior doors, external doors and windows, furnishings, beams, bridges, playgrounds and toys. Specific weight: dry Kg/m3 450/490.

Larch

Conifer found in European and Siberian alpine areas. Hard and resinous wood, very resistant and long lasting; it has a red-yellowish colour, with a range of different shades. It has a good workability but due to its strong mechanical characteristics it is stable only in the laminated form. It is suitable to manufacture beams, interior doors, external doors and windows and carpentry products in general. Specific weight: dry Kg/m3 600/700.

Pine

Conifer found in northern Europe. It has an excellent workability and stability; it is suitable for both internal and external carpentry products. Pine wood has a pinkish-yellow colour and like many conifer woods it has darker nodes commonly called knots. Use: interior doors, external doors and windows and furnishings. Specific weight: dry Kg/m3 500/550.

Oak

Broad leaf tree mainly found in Europe but also in America. The colour of the wood ranges from brownish yellow to ochre. Use: furnishings, door and window frames in general and of course the French oak barrels that give wine an unmistakable perfume. Excellent workability and stability, and easy to find on the market. Specific weight: dry Kg/m3 700/750.

Ecoklima 92 - Certification
Certification of standard compliance for Ecoklima 92
502 KB
Ecoklima 92 - Soundproofing
Certificate of compliance in accordance with sound insulation
3 497 KB
Ecology 68 - Certification
Certification of standard compliance for Ecology 68
1 771 KB
Ecology 68 - Soundproofing
Certificate of compliance in accordance with sound insulation
2 004 KB
Eternity 90 - Certificazione
Certification of standard compliance for Eternity 90
1 771 KB

 
 

Section of our products

 
 

ECOKLIMA 92

ECOLOGY 68

ETERNITY 90